View TFS150C_1324422.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TFS150C.doc
version 1.2
29.01.2001
VI TELEFILTER
Filter Specification
TFS 150C
1/5
Measurement condition
Ambient temperature: 23 C Input power level: 0 dBm Terminating impedances: for input: 930 Ohm // -1.6 pF (measured between the two source pins) for output: 930 Ohm // -1.6 pF (measured between the two load pins)
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 150C is the maxiimum in the usable signal bandwidth. The maximum attenuation amax in the usable signal bandwidth is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 150,4 MHz without tolerance. The given values for the relative attenuation arel have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc
Data
Insertion loss (Reference level) Nominal frequency Centre frequency 3 dB bandwidth Usable signal band width Relative attenuation @fN 910 kHz arel ae
fN fC
typ. value
2,8 150,41 BW 107 65 TC ca. - 0,036 ppm/K 30 C dB MHz kHz dB
tolerance/limit
max. 5 150,4 min.fN10 min. 60 kHz dB dB MHz
Operating temperature range Storage temperature range Temperature coefficient of frequency Frequency inversion temperature
- 20 C ... + 70 C - 30 C ... + 85 C -
Generated: Checked / approved:
VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS150C.doc
version 1.2
29.01.2001
VI TELEFILTER
Filter Specification
TFS 150C
2/5
Construction, pin configuration and 50 - matching network
(All dimensions in mm)
S150C tft N03
Date code
Date code: L M N ...
Year + week 1999 2000 2001
Pin 1,2: Pin 6,7: Pin 3,4,5,8 9,10
balanced Output balanced Input Ground
1 10 9
2
3 4
5 8 7 6
50 Ohm Test circuit 1
L1 7 2 L4
50 Ohm
C1
SAW
6 1
C2
50 Ohm
L2
L3
3, 4, 5, 8, 9, 10
50 Ohm Test circuit 2
C1 7 2
C4
50 Ohm
L1
SAW
6 1
L2
50 Ohm
C2
C3
3, 4,5,8,9,10
VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS150C.doc
version 1.2
29.01.2001
VI TELEFILTER
Stability Characteristics
Filter Specification
TFS 150C
3/5
After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Damp heat: (cycle) 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 25 C to 55C / 95% r.H. / 10 cycles DIN IEC 68 - 2 - 30 Db max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer 2000 min 300 mm min 500 mm min 300 mm
Tape (all dimensions in mm) W Po Do : : : 16 0,3 4 0,1 1,5 + 0,1 1,75 0,1 7,5 0,1 0,6 2 0,1 12 1,5 7,6 9,6 0,1
EMBOSSED CARRIER TAPE
Do
Po
P2
E : F : G (min) : P2 : P1 : D1(min) : Ao : Bo CT : :
E Ao F W
D1 CT Bo
G
0,1 0,1
COVER TAPE
P1
13,5 + 0,1
W2
Reel (all dimensions in mm): A W1 W2 (max) : N (min) C : : : : 330 16,4 +2 22,4 60
C A N
12,8
0,1
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape.
VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS150C.doc
version 1.2
29.01.2001
VI TELEFILTER
Air reflow temperature conditions
Filter Specification
TFS 150C
4/5
1st and 2nd air reflow profile
Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C
Chip-mount air reflow profile
260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240
Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120
VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS150C.doc
version 1.2
29.01.2001
VI TELEFILTER
History
Version 1.0 1.1 Reason of Changes
Filter Specification
TFS 150C
5/5
Name Dr. Wall Dr. Wall
Date 06 / 1997 23.01.2001
Generation of specification according to customer requirements. Correct pinning information Correct tape and reel information Add history Change pin 1 marker from ! to tft
1.2
Dr. Wall
29.01.2001
VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

▲Up To Search▲

Price & Availability of TFS150C

	To Download TFS150C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .